Physics Measurements in Imaging
From Radiological Sciences
Contents |
[edit] Course Title: Physics Measurements in Imaging Laboratory
[edit] Course No.:RADI 5018
[edit] Instructors:Jonathan Tucker, PhD (Course Director)
- Janet Feng, Ph.D
- Davy Goff, Ph.D.
- Carl Keener, Ph.D.
- Bahadir Ozus, Ph.D.
[edit] Text:
Quality Management in the Imaging Sciences, Jeffrey Papp, Ph.D., Mosby, St. Louis, 2002
[edit] Credits:
2
[edit] Semester Offered:
Spring
[edit] Recommended References:
- AAPM Report #31 Standardized Methods for Measuring Diagnostic X-Ray Exposures (1990)
- AAPM Report #39 Specification and Acceptance Testing of Computed Tomography Scanners (1993)
- AAPM Report #42 The Role of the Clinical Medical Physicist in Diagnostic Radiology (1994)
- AAPM Report #65 Real-Time B-Mode Ultrasound Quality Control Test Procedures (1998)
- AAPM Report #70 Cardiac Catherization Equipment Performance (2001)
- AAPM Report #74 Quality Control in Diagnostic Radiology (2002)
- NCRP Report #99 Quality Assurance for Diagnostic Imaging Equipment (1988)
- ACR Mammography Quality Control Manual (1999)
- Kodak Mammography Optimization Guide (1999)
- Kodak Identifying and Correcting Processing Artifacts (Technical and Scientific Monograph No. 4)
- ACR MRI Quality Control Manual (2001)
[edit] Evaluation Scheme:
[edit] Course Outline:
- Performance of measurements used in quality assurance (QA)
- System characterization
- Acceptance testing of medical imagers
[edit] List of Topics by Week
- Introduction, Equipment, Tour of Facilities
- Waveform, Timer, Output, kVp, HVL
- Scatter Measurements & Radiation Safety
- Focal Spot Size and Resolution Testing
- Fluoroscopy
- Electronic Imaging I
- Electronic Imaging II
- Computed Tomography I
- Computed Tomography II
- Ultrasound
- MR Imaging I
- MR Imaging II
- Processor & Screens
- Mammography I
- Mammography II
- Examination II - Final Exam
[edit] Course Appendix:
1 set of exams, 1 student evaluation (1 set of experiment descriptions, etc.).

![[Main Page]](/wiki.png)